You can now be confident that your crossbow will shoot each of these crossbow arrows consistently, and that you will have more accurate hits, ultimately leading to tighter groups. You are now finished with the shoot-tuning process. Mark the “C” vanes on each arrow so that you will know to load the “C” vane in the flight rail when shooting these arrows. You will likely see these arrows shoot into the original group. If you had any arrows left that still did not hit in the original group, shoot these arrows again, but load the arrow with the “C” vane down in the flight rail. (Author photo)Ĭollect the arrows that now shoot in the original group and mark the “B” vanes on each so that you will know to always shoot these arrows using the “B” vane in the down position in the flight rail. Shoot-tuning can take some extra time and effort, but it is time well spent to know exactly how each crossbow arrow performs, and how to get the absolute best accuracy from your crossbow. If you are shooting J-nocks, capture or moon nocks, you will have to re-index the nocks to the “B” vane prior to shooting the second time. If you are shooting a flat nock or OmniNock, you will not have to re-index your nock to shoot the “B” vane. Shoot at the same spot on the target to determine if the arrows will now hit in the original group. This time, rotate the arrow and shoot the “B” vane in the down position. Shoot these arrows again, but do not load the “A” vane in the flight rail. Set these arrows aside.Ĭollect the arrows that did not shoot in the group with the others. Collect these arrows and put a check or some other type of mark on the “A” vane so that you will know to always shoot it in the down position in the flight rail when using this arrow. That means that these arrows are grouping together when you use the “A” vane in the flight rail. You will likely notice that most of the arrows hit in nearly the same spot. Review the grouping after shooting all of the arrows one time each. HOW TO CHOOSE THE BEST CROSSBOW ARROW WEIGHT If possible, shoot one arrow at a time and pull it before shooting the next arrow – you don’t want to damage any of your arrows by shooting them into one another.Īfter each shot, number the hole left behind in the target with the arrow number that you shot, so that you can remember which arrows did not group well with the others. Be sure for this first round of shooting that you are sliding the “A” vane down in the flight rail when loading. Shoot the crossbow arrows at the target in the order in which you numbered them to determine how closely the arrows group out of the box. KNOW WHAT TO LOOK FOR WHEN BUYING A CROSSBOW TARGET Note: some crossbow arrows now come with a circle preprinted on the vane specifically for shoot-tuning. It is best to be consistent and begin by marking the odd colored vane on the arrow as the “A” vane. Next, assign letters to the vanes of each of the arrows – in other words, each arrow should have an “A” vane, a “B” vane and a “C” vane. Prepare your arrows to be shot by attaching field points and by using a marker to number each of the arrows – for instance, if you bought a three-pack of arrows, you will number the arrows “1”, “2” and “3.” This process is known as “shoot-tuning” the arrows. Taking this extra step will help to guarantee that all your crossbow arrows will accurately hit your aiming point. But, if you really wish to shoot as accurately as possible with your crossbow arrows, you should shoot each arrow separately to verify that it is grouping with the others. This is a common practice of many hunters when they are preparing for the upcoming crossbow hunting season. After you have shot the arrow with the broadhead and made any additional sight adjustments, you are satisfied with the performance and you mount the broadheads on the remaining unshot arrows and head to the field.ħ TIPS FOR DEER HUNTING WITH A CROSSBOW Shoot-tuning your crossbow arrows will help you achieve the tightest groups and deadliest hunting accuracy possible. After you have verified that the sights are set correctly, you then use the same, or perhaps an additional arrow, to test the flight with a broadhead. ![]() After you bring the arrows home, you shoot one arrow with a field point (maybe multiple times) to check that the bow is sighted in properly. crossbow bolts) to use for the upcoming hunting season. Does this scenario sound familiar? You purchase a six-pack of crossbow arrows(a.k.a.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |